Description: The Wolf Tooth Re Mote Bell Tower Dropper Lever allows Spurcycle Bells to be mounted directly to special Wolf Tooth Re Mote handlebar clamps. Close, clean, clear and more than a little pleasing to the ear. For the vast majority of riders, sharing trails is a fact of life. And we love seeing hikers, walkers, equestrians, and other cyclists sharing our love of the outdoors. But how we interact with other trail users reflects not only on us as individuals but on cyclists as a group. Which is why Wolf Tooth Components are huge fans of the trail bell to announce our approach in a friendly, non-confrontational way. While almost any bell will do the trick, with it's sweet, clear sound and handsome design - Spurcycle's US-made bell stands out both on the trail and on the handlebar. They're what we ride, but getting the ringer close enough to the grip while clearing some brake lever clamps can be a little tricky. Which is why we built the Wolf Tooth Re Mote Bell Tower. Wolf Tooth Re Mote Bell Tower Dropper Lever Features Re Mote Bell Tower - a standard action Re Mote with the Bell Tower clamp (no bell) Re Mote Bell Tower Light Action - a light action Re Mote with the Bell Tower clamp (no bell) Re Mote Bell Tower Kit - a standard action Re Mote with the Bell Tower clamp AND a black bell Re Mote Bell Tower Light Action Kit - a light action Re Mote with the Bell Tower clamp AND a black bell Re Mote Bell Tower 22.2mm Handlebar Clamp and Black Bell - a standard 22mm Bell Tower handlebar clamp that can be fitted to your existing remote lever along with a black bell Re Mote Bell Tower 22.2mm Handlebar Clamp - a standard 22mm Bell Tower handlebar clamp that can be fitted to your existing remote lever (no bell). Wolf Tooth Re Mote Bell Tower Dropper Lever Compatibility Made to work specifically with the Spurcycle bells Re Mote can be used with and without a Spurcycle bell installed Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post. If the barrel is normally at the remote, simply clip the barrel off and the cable will be "pinched" at both the post and the remote (no barrel needed) Wolf Tooth Re Mote Bell Tower Dropper Lever Specifications Remote The kits include both the Bell Tower Re Mote and a Spurcycle black bell Re Mote material - 6061 T6 Aluminum with Delrin axle Light Action version (LA) reduces actuation force by roughly 1/3 vs the standard remote. The lever itself is approximately 10mm longer. This is a standard 22.2 mm handlebar clamp that fits flat handlebars (note that the clamp diameter where your shifter and brake are is 22.2mm even on bars that have a 35mm stem clamp diameter. Attach with 1 NM max (it doesn't take much!) Colors - Black Weight - Shimano IS-AB - 31g, Shimano IS-II - 33g, SRAM MM - 42g, 22 (hinged clamp) - 36g From lever to packaging, 65% or more of each Re Mote is made in the USA. Spurcycle Bell Material: Premium brass and stainless steel Finish: Raw or Black DLC Dome size: 30mm x 20.5mm Weight: 45g Origin*: Made in USA Install: 2.5mm hex tool required. Wolf Tooth Remote Belltower Dropper Lever Black - shop the best deal online on sportessentials.co.uk
