Stans No Tubes Cycling

Description: Developed with world-class athletes and their mechanics the Race Day Tubeless Sealant provides highly effective puncture sealing performance to riders of all levels during their own race or long-distance event. The Race Day formula begins with the same proprietary mix in the Original Tubeless Sealant and increases the amount of sealing crystals by 200%. Then additional XL-sized crystals are added to repair even larger punctures. For best performance it is recommended to visually inspect Race Day sealant in tyres every 2-3 weeks to monitor liquid levels. One litre of Stan’s Race Day Tyre Sealant will seal up to 16 tyres. Cannot be installed through a valve – must be installed directly into the tyre over the bead. Tested and developed with world class athletes Recommended for race day and long-distance event use Improved sealing capabilities compared to Original Tubeless Sealant formula 200% more sealing crystal than the original formula with added XL-sized crystals Must be poured directly into the tyre – not compatible with injector or other valve install methods. Stans No Tubes Race Day Tyre Sealant 1000ml - shop the best deal online on sportessentials.co.uk

Category: Cycling

RRP: 44

GTIN: 847746065616

Description: The first tubeless sealant in the world formulated by founder Stan in 2001 and still the number one choice of riders today. Recommended for all-around use compatible with all tubeless road gravel and mountain bike tyres. The Original formula is the best choice for providing reliable puncture sealant performance over a 2-7 month period however arid conditions may require more frequent monitoring of liquid sealant levels. Anti-freezing agents allow for use in temperatures down to -20ºF. One litre of Stan’s Original Tyre Sealant can seal up to 16 tyres. For easy installation use with the Stan’s Tubeless Sealant Injector. Features The world’s first tubeless sealant and the first choice of riders today Recommended for all-around use compatible with all tubeless road gravel and mountain bike tyres Seals punctures up to 6.5mm Compatible with valve installation using Stan’s Tubeless Sealant Injector Remains liquid inside tyres for 2-7 months for long-lasting protection. Stans No Tubes Tyre Sealant 250ml Bottle - shop the best deal online on sportessentials.co.uk

Category: Cycling

RRP: 10

GTIN: 847746065586

Description: The world’s first tubeless sealant and the first choice of riders today. Recommended for all-around use compatible with all tubeless road gravel and mountain bike tyres. Seals punctures up to 6.5mm. Compatible with valve installation using Stan’s Tubeless Sealant Injector. Remains liquid inside tyres for 2-7 months for long-lasting protection. The first tubeless sealant in the world formulated by founder Stan in 2001 and still the number one choice of riders today. The original formula is the best choice for providing reliable puncture sealant performance over a 2-7 month period however arid conditions may require more frequent monitoring of liquid sealant levels. Anti-freezing agents allow for use in temperatures down to -20ºF. 1000ml of Stan’s Original Tyre Sealant can seal up to 16 tyres. . Stans No Tubes Tyre Sealant 1 Litre - shop the best deal online on sportessentials.co.uk

Category: Cycling

RRP: 34

GTIN: 847746065609

Description: The world’s first tubeless sealant and the first choice of riders today. Recommended for all-around use compatible with all tubeless road gravel and mountain bike tyres. Seals punctures up to 6.5mm. Compatible with valve installation using Stan’s Tubeless Sealant Injector. Remains liquid inside tyres for 2-7 months for long-lasting protection. The first tubeless sealant in the world formulated by founder Stan in 2001 and still the number one choice of riders today. The original formula is the best choice for providing reliable puncture sealant performance over a 2-7 month period however arid conditions may require more frequent monitoring of liquid sealant levels. Anti-freezing agents allow for use in temperatures down to -20ºF. 500ml of Stan’s Original Tyre Sealant can seal up to 8 tyres. Stans No Tubes Tyre Sealant 500ml - shop the best deal online on sportessentials.co.uk

Category: Cycling

RRP: 20

GTIN: 847746065593

Description: Stans developed the Dual Action Repair for Tubeless DART to fix damaged tires faster easier and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture the DART creates a chemical reaction with your Stan’s sealant to quickly form a permanent airtight bond. The DART’s patent pending ability to react with latex sealant makes it more effective than traditional tire plugs but we didn’t stop there. To create the best repair for tubeless tires possible we made sure every detail was right. Traditional plug tools were originally developed for car tires and their long sharp tips can cause damage to rim tape or cut hands. Even worse their plugs can actually expand many punctures because they rely on a tight fit to hold them in place. In contrast the DART’s plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims rim tape and your hands. The material of the DART is also more flexible and its laser-cut shape is optimized to contour to the shape of different punctures maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant it also won’t pull out while riding the way a conventional plug can. One of the best features of the DART’s design is that it doesn’t require trimming once inserted and excess material won’t get in the way of your ride. DAR Ts can’t be felt while riding even on road tires and they wear smooth naturally. The DART Tool is designed to be extremely light durable and easy to fit into pockets and packs while offering an ergonomic design that’s easy to hold and allows precise DART placement. The DART Tool’s handle includes a built-in valve core remover making it easy to add sealant. The tool is made of an ultra-strong but light molded plastic. Because even the small details are important the rod that presses DAR Ts into punctures is made of ultralight corrosion-resistant and incredibly strong carbon. The length of the rod is specifically calibrated to let you insert DAR Ts to the perfect depth every time just by pressing until the head of the DART Tool contacts your tire. No more damage to rim or rim tape during a fast repair. The head of the DART Tool is double-sided and reversible allowing it to hold two sealed DAR Ts on each side. This makes it possible to install two DAR Ts quickly when sealing the largest slices and punctures and even multiple punctures. Clear thread-on caps protect the stored DARTS keeping them clean and ready to use while being easy to see through to ensure you have a fresh DART ready for a repair and quick to unthread for fast deployment. It all fits together in a compact tool that easily fits in any pocket or pack. Repairs large punctures and slices. Reacts with Stan’s sealant to form an instant airtight seal Barbed plastic tip anchors into tire and will not pull out when riding Flexible material and laser-cut shape conforms to puncture and bonds with sealant Wears off clean no trimming needed and can not be felt while riding even on road tires Lightweight compact tool fits the shape of your hand for more precise use and includes built-in valve core remover Includes two pre-loaded DAR Ts for sealing multiple and larger punctures Clear caps keep DAR Ts clean and unthread quickly for fast deployment Simple and easy to refill. Stans No Tubes Dart Tubeless Tyre Repair Tool - shop the best deal online on sportessentials.co.uk

Category: Cycling

RRP: 24.99

GTIN: 847746052654

Description: The first tubeless sealant in the world formulated by their founder Stan in 2001 and still the number one choice of riders today. Recommended for all-around use compatible with all tubeless road gravel and mountain bike tyres. The Original formula is the best choice for providing reliable puncture sealant performance over a 2-7 month period however arid conditions may require more frequent monitoring of liquid sealant levels. Anti-freezing agents allow for use in temperatures down to -20ºF. The world’s first tubeless sealant and the first choice of riders today Recommended for all-around use compatible with all tubeless road gravel and mountain bike tyres Seals punctures up to 6.5mm Compatible with valve installation using Stan’s Tubeless Sealant Injector Remains liquid inside tyres for 2-7 months for long-lasting protection I firmly believe Stan's is simply the most effective sealant available - 10/10 MBR ' You can stick as many screwdrivers into a tyre as you want and watch it seal but the proof is in the pudding in the real world where this is simply the most effective and consistent sealant I’ve used. The blend has sorted me out even in tyres that are pierced in awkward harder-to-seal places like right next to the bead or in the corner of a tread block rather than on the crown between knobs and also where changing temperatures and difficult-to-seal holes play havoc with many rival formulas. ' - MBR Magazine website August 2024. . Stans No Tubes 125ml Sealant - shop the best deal online on sportessentials.co.uk

Category: Cycling

RRP: 7

GTIN: 847746065579

Description: This kit includes everything you need to replace the inner tubes in your tubeless ready rims and tires with genuine Stan’s sealant--the original and still the best tubeless tire sealant. All Mountain Bike Tubeless Kits include 200ml of sealant 44mm brass valves and Stan’s Yellow Tape. Kits are offered in different tape widths to fit a variety of rims. If you're unsure whether your rims are tubeless ready look for graphics that mention it directly on the wheel or contact the manufacturer for details. Do not attempt to use a tubeless system on wheels that are not explicitly tubeless compatible. WHAT SIZE DO I NEED?: We recommend tape that is 1-2mm wider than the internal width of your rim to account for the drop channel. For example a rim featuring a 28mm internal rim width would require the 30mm kit. We recommend going with the wider option if you rims falls in between sizes. HOW DOES IT WORK: Our simple tubeless system begins with our Yellow Tape. Unlike some tapes that allow moisture to pass through them and into the rim cavity creating a mess of glue and liquid that can corrode rims Stan’s Yellow Tape forms a non-permeable vapor barrier for airtight protection. Our tried-and-true tubeless valves offer simple tool-free installation with removable valve cores to allow for easier sealant refreshes. Stan’s sealant stays liquid in your tire ready to seal a sudden puncture almost instantly while letting you ride faster and with more traction and control. Stan’s sealant lets you ride further faster and flat-free. Everything you need to quickly and easily complete your conversion to tubeless. Stan’s Sealant seals punctures up to 6.5mm 1/4' quickly and offers long-lasting protection. 44mm brass valves feature removable valve core for easy sealant refresh and fit most mountain rims. Yellow Tape helps seal spoke holes airtight and does not allow liquid to pass keeping rim interior dry. 200ml of sealant provides enough liquid to seal two 29” wheels with larger volume tires. Stans No Tubes Mtb Tubeless Kit Tubeless Kit 33mm Tape - shop the best deal online on sportessentials.co.uk

Category: Cycling

RRP: 45

GTIN: 847746065548

Description: This kit includes everything you need to replace the inner tubes in your tubeless ready rims and tires with genuine Stan’s sealant--the original and still the best tubeless tire sealant. All Mountain Bike Tubeless Kits include 200ml of sealant 44mm brass valves and Stan’s Yellow Tape. Kits are offered in different tape widths to fit a variety of rims. If you're unsure whether your rims are tubeless ready look for graphics that mention it directly on the wheel or contact the manufacturer for details. Do not attempt to use a tubeless system on wheels that are not explicitly tubeless compatible. WHAT SIZE DO I NEED?: We recommend tape that is 1-2mm wider than the internal width of your rim to account for the drop channel. For example a rim featuring a 28mm internal rim width would require the 30mm kit. We recommend going with the wider option if you rims falls in between sizes. HOW DOES IT WORK: Our simple tubeless system begins with our Yellow Tape. Unlike some tapes that allow moisture to pass through them and into the rim cavity creating a mess of glue and liquid that can corrode rims Stan’s Yellow Tape forms a non-permeable vapor barrier for airtight protection. Our tried-and-true tubeless valves offer simple tool-free installation with removable valve cores to allow for easier sealant refreshes. Stan’s sealant stays liquid in your tire ready to seal a sudden puncture almost instantly while letting you ride faster and with more traction and control. Stan’s sealant lets you ride further faster and flat-free. Everything you need to quickly and easily complete your conversion to tubeless. Stan’s Sealant seals punctures up to 6.5mm 1/4' quickly and offers long-lasting protection. 44mm brass valves feature removable valve core for easy sealant refresh and fit most mountain rims. Yellow Tape helps seal spoke holes airtight and does not allow liquid to pass keeping rim interior dry. 200ml of sealant provides enough liquid to seal two 29” wheels with larger volume tires. Stans No Tubes Mtb Tubeless Kit Tubeless Kit 21mm Tape - shop the best deal online on sportessentials.co.uk

Category: Cycling

RRP: 45

GTIN: 847746057123

Description: WHAT YOU NEED TO KNOW: Stan's Yellow Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure a double wrap of tape is required. WHAT IF I HAVE AN OLDER RIM? The BST Bead Socket Technology profile developed by Stan's No Tubes was a departure from traditional bicycle rim design and its core concept is the basis for the vast majority of 'tubeless-ready' rims and wheels on the market today. Stan's Yellow Rim Tape is not by itself a tubeless conversion for older traditional non-'tubeless-ready' rims. These older rims require the use of a Stan’s No Tubes Rim Strip now discontinued to re-shape the rim bed to achieve a safe secure tubeless setup. While we would recommend considering a new tubeless-ready wheelset in place of a rim strip conversion Stan's Rim Strips and kits may still be available at your local bike shop and can be used to convert vintage bikes with older non-tubeless-ready rims. Using only Yellow Rim Tape and Stan’s No Tubes sealant on a non-tubeless-ready rim can result in not only difficult inflation during set-up but catastrophic 'burping' issues while riding. Creates durable airtight seal over spoke holes. Completely non-porous vapour barrier seals rim interior from moisture. Natural gum rubber adhesive sticks where and when you want it to but leaves no residue. Low friction surface helps tyre beads slip into place. Stan's 21mm Rim Tape is recommended for rims with an internal width of 17-20mm. 9.14m x 21mm 10yd x.83in. Stan's 25mm Rim Tape is recommended for rims with an internal width of 23-25mm. 9.14m x 25mm 10yd x.98in. Stan's 27mm Rim Tape is recommended for rims with an internal width of 25-27mm. 9.14m x 27mm 10yd x 1.06in. Stan's 30mm Rim Tape is recommended for rims with an internal width of 28-30mm. 9.14m x 30mm 10yd x 1.18in. Stan's 33mm Rim Tape is recommended for rims with an internal width of 31-33mm. 9.14m x 33mm 10yd x 1.30in. Stan's 36mm Rim Tape is recommended for rims with an internal width of 34-36mm. 9.14m x 36mm 10yd x 1.41in. Stan's 39mm Rim Tape is recommended for rims with an internal width of 37-39mm. 9.14m x 39mm 10yd x 1.54in. Stans No Tubes Rim Tape 10yds (9.14m) 10yd x 1.54in 9.14m x 39mm - shop the best deal online on sportessentials.co.uk

Category: Cycling

RRP: 22

GTIN: 847746026815

Description: WHAT YOU NEED TO KNOW: Stan's Yellow Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure a double wrap of tape is required. WHAT IF I HAVE AN OLDER RIM? The BST Bead Socket Technology profile developed by Stan's No Tubes was a departure from traditional bicycle rim design and its core concept is the basis for the vast majority of 'tubeless-ready' rims and wheels on the market today. Stan's Yellow Rim Tape is not by itself a tubeless conversion for older traditional non-'tubeless-ready' rims. These older rims require the use of a Stan’s No Tubes Rim Strip now discontinued to re-shape the rim bed to achieve a safe secure tubeless setup. While we would recommend considering a new tubeless-ready wheelset in place of a rim strip conversion Stan's Rim Strips and kits may still be available at your local bike shop and can be used to convert vintage bikes with older non-tubeless-ready rims. Using only Yellow Rim Tape and Stan’s No Tubes sealant on a non-tubeless-ready rim can result in not only difficult inflation during set-up but catastrophic 'burping' issues while riding. Creates durable airtight seal over spoke holes. Completely non-porous vapour barrier seals rim interior from moisture. Natural gum rubber adhesive sticks where and when you want it to but leaves no residue. Low friction surface helps tyre beads slip into place. Stan's 21mm Rim Tape is recommended for rims with an internal width of 17-20mm. 54.86m x 21mm 60yd x 0.83in. Stan's 25mm Rim Tape is recommended for rims with an internal width of 23-25mm. 54.86m x 25mm 60yd x 0.98in. Stan's 27mm Rim Tape is recommended for rims with an internal width of 25-27mm. 54.86m x 27mm 60yd x 1.06in. Stan's 30mm Rim Tape is recommended for rims with an internal width of 28-30mm. 54.86m x 30mm 60yd x 1.18in. Stan's 33mm Rim Tape is recommended for rims with an internal width of 31-33mm. 54.86m x 33mm 60yd x 1.30in. Stan's 36mm Rim Tape is recommended for rims with an internal width of 34-36mm. 54.86m x 36mm 60yd x 1.41in. Stan's 39mm Rim Tape is recommended for rims with an internal width of 37-39mm. 54.86m x 39mm 60yd x 1.54in. Stans No Tubes Rim Tape 60yd X 1.54in 54.86m X 39mm - shop the best deal online on sportessentials.co.uk

Category: Cycling

RRP: 54

GTIN: 847746026822

Description: WHAT YOU NEED TO KNOW: Stan's Yellow Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure a double wrap of tape is required. WHAT IF I HAVE AN OLDER RIM? The BST Bead Socket Technology profile developed by Stan's No Tubes was a departure from traditional bicycle rim design and its core concept is the basis for the vast majority of 'tubeless-ready' rims and wheels on the market today. Stan's Yellow Rim Tape is not by itself a tubeless conversion for older traditional non-'tubeless-ready' rims. These older rims require the use of a Stan’s No Tubes Rim Strip now discontinued to re-shape the rim bed to achieve a safe secure tubeless setup. While we would recommend considering a new tubeless-ready wheelset in place of a rim strip conversion Stan's Rim Strips and kits may still be available at your local bike shop and can be used to convert vintage bikes with older non-tubeless-ready rims. Using only Yellow Rim Tape and Stan’s No Tubes sealant on a non-tubeless-ready rim can result in not only difficult inflation during set-up but catastrophic 'burping' issues while riding. Creates durable airtight seal over spoke holes. Completely non-porous vapour barrier seals rim interior from moisture. Natural gum rubber adhesive sticks where and when you want it to but leaves no residue. Low friction surface helps tyre beads slip into place. Stan's 21mm Rim Tape is recommended for rims with an internal width of 17-20mm. 9.14m x 21mm 10yd x.83in. Stan's 25mm Rim Tape is recommended for rims with an internal width of 23-25mm. 9.14m x 25mm 10yd x.98in. Stan's 27mm Rim Tape is recommended for rims with an internal width of 25-27mm. 9.14m x 27mm 10yd x 1.06in. Stan's 30mm Rim Tape is recommended for rims with an internal width of 28-30mm. 9.14m x 30mm 10yd x 1.18in. Stan's 33mm Rim Tape is recommended for rims with an internal width of 31-33mm. 9.14m x 33mm 10yd x 1.30in. Stan's 36mm Rim Tape is recommended for rims with an internal width of 34-36mm. 9.14m x 36mm 10yd x 1.41in. Stan's 39mm Rim Tape is recommended for rims with an internal width of 37-39mm. 9.14m x 39mm 10yd x 1.54in. Stans No Tubes Rim Tape 10yds (9.14m) 10yd x 1.30in 9.14m x 33mm - shop the best deal online on sportessentials.co.uk

Category: Cycling

RRP: 20

GTIN: 847746020448

Description: WHAT YOU NEED TO KNOW: Stan's Yellow Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure a double wrap of tape is required. WHAT IF I HAVE AN OLDER RIM? The BST Bead Socket Technology profile developed by Stan's No Tubes was a departure from traditional bicycle rim design and its core concept is the basis for the vast majority of 'tubeless-ready' rims and wheels on the market today. Stan's Yellow Rim Tape is not by itself a tubeless conversion for older traditional non-'tubeless-ready' rims. These older rims require the use of a Stan’s No Tubes Rim Strip now discontinued to re-shape the rim bed to achieve a safe secure tubeless setup. While we would recommend considering a new tubeless-ready wheelset in place of a rim strip conversion Stan's Rim Strips and kits may still be available at your local bike shop and can be used to convert vintage bikes with older non-tubeless-ready rims. Using only Yellow Rim Tape and Stan’s No Tubes sealant on a non-tubeless-ready rim can result in not only difficult inflation during set-up but catastrophic 'burping' issues while riding. Creates durable airtight seal over spoke holes. Completely non-porous vapour barrier seals rim interior from moisture. Natural gum rubber adhesive sticks where and when you want it to but leaves no residue. Low friction surface helps tyre beads slip into place. Stan's 21mm Rim Tape is recommended for rims with an internal width of 17-20mm. 9.14m x 21mm 10yd x.83in. Stan's 25mm Rim Tape is recommended for rims with an internal width of 23-25mm. 9.14m x 25mm 10yd x.98in. Stan's 27mm Rim Tape is recommended for rims with an internal width of 25-27mm. 9.14m x 27mm 10yd x 1.06in. Stan's 30mm Rim Tape is recommended for rims with an internal width of 28-30mm. 9.14m x 30mm 10yd x 1.18in. Stan's 33mm Rim Tape is recommended for rims with an internal width of 31-33mm. 9.14m x 33mm 10yd x 1.30in. Stan's 36mm Rim Tape is recommended for rims with an internal width of 34-36mm. 9.14m x 36mm 10yd x 1.41in. Stan's 39mm Rim Tape is recommended for rims with an internal width of 37-39mm. 9.14m x 39mm 10yd x 1.54in. Stans No Tubes Rim Tape 10yds (9.14m) 10yd x 1.18in 9.14m x 30mm - shop the best deal online on sportessentials.co.uk

Category: Cycling

RRP: 20

GTIN: 847746020431

Description: WHAT YOU NEED TO KNOW: Stan's Yellow Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure a double wrap of tape is required. WHAT IF I HAVE AN OLDER RIM? The BST Bead Socket Technology profile developed by Stan's No Tubes was a departure from traditional bicycle rim design and its core concept is the basis for the vast majority of 'tubeless-ready' rims and wheels on the market today. Stan's Yellow Rim Tape is not by itself a tubeless conversion for older traditional non-'tubeless-ready' rims. These older rims require the use of a Stan’s No Tubes Rim Strip now discontinued to re-shape the rim bed to achieve a safe secure tubeless setup. While we would recommend considering a new tubeless-ready wheelset in place of a rim strip conversion Stan's Rim Strips and kits may still be available at your local bike shop and can be used to convert vintage bikes with older non-tubeless-ready rims. Using only Yellow Rim Tape and Stan’s No Tubes sealant on a non-tubeless-ready rim can result in not only difficult inflation during set-up but catastrophic 'burping' issues while riding. Creates durable airtight seal over spoke holes. Completely non-porous vapour barrier seals rim interior from moisture. Natural gum rubber adhesive sticks where and when you want it to but leaves no residue. Low friction surface helps tyre beads slip into place. Stan's 21mm Rim Tape is recommended for rims with an internal width of 17-20mm. 54.86m x 21mm 60yd x 0.83in. Stan's 25mm Rim Tape is recommended for rims with an internal width of 23-25mm. 54.86m x 25mm 60yd x 0.98in. Stan's 27mm Rim Tape is recommended for rims with an internal width of 25-27mm. 54.86m x 27mm 60yd x 1.06in. Stan's 30mm Rim Tape is recommended for rims with an internal width of 28-30mm. 54.86m x 30mm 60yd x 1.18in. Stan's 33mm Rim Tape is recommended for rims with an internal width of 31-33mm. 54.86m x 33mm 60yd x 1.30in. Stan's 36mm Rim Tape is recommended for rims with an internal width of 34-36mm. 54.86m x 36mm 60yd x 1.41in. Stan's 39mm Rim Tape is recommended for rims with an internal width of 37-39mm. 54.86m x 39mm 60yd x 1.54in. Stans No Tubes Rim Tape 60yd X 1.41in 54.86m X 36mm - shop the best deal online on sportessentials.co.uk

Category: Cycling

RRP: 52

GTIN: 847746020486

Description: WHAT YOU NEED TO KNOW: Stan's Yellow Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure a double wrap of tape is required. WHAT IF I HAVE AN OLDER RIM? The BST Bead Socket Technology profile developed by Stan's No Tubes was a departure from traditional bicycle rim design and its core concept is the basis for the vast majority of 'tubeless-ready' rims and wheels on the market today. Stan's Yellow Rim Tape is not by itself a tubeless conversion for older traditional non-'tubeless-ready' rims. These older rims require the use of a Stan’s No Tubes Rim Strip now discontinued to re-shape the rim bed to achieve a safe secure tubeless setup. While we would recommend considering a new tubeless-ready wheelset in place of a rim strip conversion Stan's Rim Strips and kits may still be available at your local bike shop and can be used to convert vintage bikes with older non-tubeless-ready rims. Using only Yellow Rim Tape and Stan’s No Tubes sealant on a non-tubeless-ready rim can result in not only difficult inflation during set-up but catastrophic 'burping' issues while riding. Creates durable airtight seal over spoke holes. Completely non-porous vapour barrier seals rim interior from moisture. Natural gum rubber adhesive sticks where and when you want it to but leaves no residue. Low friction surface helps tyre beads slip into place. Stan's 21mm Rim Tape is recommended for rims with an internal width of 17-20mm. 54.86m x 21mm 60yd x 0.83in. Stan's 25mm Rim Tape is recommended for rims with an internal width of 23-25mm. 54.86m x 25mm 60yd x 0.98in. Stan's 27mm Rim Tape is recommended for rims with an internal width of 25-27mm. 54.86m x 27mm 60yd x 1.06in. Stan's 30mm Rim Tape is recommended for rims with an internal width of 28-30mm. 54.86m x 30mm 60yd x 1.18in. Stan's 33mm Rim Tape is recommended for rims with an internal width of 31-33mm. 54.86m x 33mm 60yd x 1.30in. Stan's 36mm Rim Tape is recommended for rims with an internal width of 34-36mm. 54.86m x 36mm 60yd x 1.41in. Stan's 39mm Rim Tape is recommended for rims with an internal width of 37-39mm. 54.86m x 39mm 60yd x 1.54in. Stans No Tubes Rim Tape 60yds (54.86m) 60yd x 1.30in 54.86m x 33mm - shop the best deal online on sportessentials.co.uk

Category: Cycling

RRP: 50

GTIN: 847746020479

Description: WHAT YOU NEED TO KNOW: Stan's Yellow Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure a double wrap of tape is required. WHAT IF I HAVE AN OLDER RIM? The BST Bead Socket Technology profile developed by Stan's No Tubes was a departure from traditional bicycle rim design and its core concept is the basis for the vast majority of 'tubeless-ready' rims and wheels on the market today. Stan's Yellow Rim Tape is not by itself a tubeless conversion for older traditional non-'tubeless-ready' rims. These older rims require the use of a Stan’s No Tubes Rim Strip now discontinued to re-shape the rim bed to achieve a safe secure tubeless setup. While we would recommend considering a new tubeless-ready wheelset in place of a rim strip conversion Stan's Rim Strips and kits may still be available at your local bike shop and can be used to convert vintage bikes with older non-tubeless-ready rims. Using only Yellow Rim Tape and Stan’s No Tubes sealant on a non-tubeless-ready rim can result in not only difficult inflation during set-up but catastrophic 'burping' issues while riding. Creates durable airtight seal over spoke holes. Completely non-porous vapour barrier seals rim interior from moisture. Natural gum rubber adhesive sticks where and when you want it to but leaves no residue. Low friction surface helps tyre beads slip into place. Stan's 21mm Rim Tape is recommended for rims with an internal width of 17-20mm. 54.86m x 21mm 60yd x 0.83in. Stan's 25mm Rim Tape is recommended for rims with an internal width of 23-25mm. 54.86m x 25mm 60yd x 0.98in. Stan's 27mm Rim Tape is recommended for rims with an internal width of 25-27mm. 54.86m x 27mm 60yd x 1.06in. Stan's 30mm Rim Tape is recommended for rims with an internal width of 28-30mm. 54.86m x 30mm 60yd x 1.18in. Stan's 33mm Rim Tape is recommended for rims with an internal width of 31-33mm. 54.86m x 33mm 60yd x 1.30in. Stan's 36mm Rim Tape is recommended for rims with an internal width of 34-36mm. 54.86m x 36mm 60yd x 1.41in. Stan's 39mm Rim Tape is recommended for rims with an internal width of 37-39mm. 54.86m x 39mm 60yd x 1.54in. Stans No Tubes Rim Tape 60yds (54.86m) 60yd x 1.18in 54.86m x 30mm - shop the best deal online on sportessentials.co.uk

Category: Cycling

RRP: 50

GTIN: 847746020462

Description: WHAT YOU NEED TO KNOW: Stan's Yellow Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure a double wrap of tape is required. WHAT IF I HAVE AN OLDER RIM? The BST Bead Socket Technology profile developed by Stan's No Tubes was a departure from traditional bicycle rim design and its core concept is the basis for the vast majority of 'tubeless-ready' rims and wheels on the market today. Stan's Yellow Rim Tape is not by itself a tubeless conversion for older traditional non-'tubeless-ready' rims. These older rims require the use of a Stan’s No Tubes Rim Strip now discontinued to re-shape the rim bed to achieve a safe secure tubeless setup. While we would recommend considering a new tubeless-ready wheelset in place of a rim strip conversion Stan's Rim Strips and kits may still be available at your local bike shop and can be used to convert vintage bikes with older non-tubeless-ready rims. Using only Yellow Rim Tape and Stan’s No Tubes sealant on a non-tubeless-ready rim can result in not only difficult inflation during set-up but catastrophic 'burping' issues while riding. Creates durable airtight seal over spoke holes. Completely non-porous vapour barrier seals rim interior from moisture. Natural gum rubber adhesive sticks where and when you want it to but leaves no residue. Low friction surface helps tyre beads slip into place. Stan's 21mm Rim Tape is recommended for rims with an internal width of 17-20mm. 9.14m x 21mm 10yd x.83in. Stan's 25mm Rim Tape is recommended for rims with an internal width of 23-25mm. 9.14m x 25mm 10yd x.98in. Stan's 27mm Rim Tape is recommended for rims with an internal width of 25-27mm. 9.14m x 27mm 10yd x 1.06in. Stan's 30mm Rim Tape is recommended for rims with an internal width of 28-30mm. 9.14m x 30mm 10yd x 1.18in. Stan's 33mm Rim Tape is recommended for rims with an internal width of 31-33mm. 9.14m x 33mm 10yd x 1.30in. Stan's 36mm Rim Tape is recommended for rims with an internal width of 34-36mm. 9.14m x 36mm 10yd x 1.41in. Stan's 39mm Rim Tape is recommended for rims with an internal width of 37-39mm. 9.14m x 39mm 10yd x 1.54in. Stans No Tubes Rim Tape 10yds (9.14m) 10yd x 1.06in 9.14m x 27mm - shop the best deal online on sportessentials.co.uk

Category: Cycling

RRP: 19

GTIN: 847746007227

Description: WHAT YOU NEED TO KNOW: Stan's Yellow Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure a double wrap of tape is required. WHAT IF I HAVE AN OLDER RIM? The BST Bead Socket Technology profile developed by Stan's No Tubes was a departure from traditional bicycle rim design and its core concept is the basis for the vast majority of 'tubeless-ready' rims and wheels on the market today. Stan's Yellow Rim Tape is not by itself a tubeless conversion for older traditional non-'tubeless-ready' rims. These older rims require the use of a Stan’s No Tubes Rim Strip now discontinued to re-shape the rim bed to achieve a safe secure tubeless setup. While we would recommend considering a new tubeless-ready wheelset in place of a rim strip conversion Stan's Rim Strips and kits may still be available at your local bike shop and can be used to convert vintage bikes with older non-tubeless-ready rims. Using only Yellow Rim Tape and Stan’s No Tubes sealant on a non-tubeless-ready rim can result in not only difficult inflation during set-up but catastrophic 'burping' issues while riding. Creates durable airtight seal over spoke holes. Completely non-porous vapour barrier seals rim interior from moisture. Natural gum rubber adhesive sticks where and when you want it to but leaves no residue. Low friction surface helps tyre beads slip into place. Stan's 21mm Rim Tape is recommended for rims with an internal width of 17-20mm. 54.86m x 21mm 60yd x 0.83in. Stan's 25mm Rim Tape is recommended for rims with an internal width of 23-25mm. 54.86m x 25mm 60yd x 0.98in. Stan's 27mm Rim Tape is recommended for rims with an internal width of 25-27mm. 54.86m x 27mm 60yd x 1.06in. Stan's 30mm Rim Tape is recommended for rims with an internal width of 28-30mm. 54.86m x 30mm 60yd x 1.18in. Stan's 33mm Rim Tape is recommended for rims with an internal width of 31-33mm. 54.86m x 33mm 60yd x 1.30in. Stan's 36mm Rim Tape is recommended for rims with an internal width of 34-36mm. 54.86m x 36mm 60yd x 1.41in. Stan's 39mm Rim Tape is recommended for rims with an internal width of 37-39mm. 54.86m x 39mm 60yd x 1.54in. Stans No Tubes Rim Tape 60yds (54.86m) 60yd x 1.06in 54.86m x 27mm - shop the best deal online on sportessentials.co.uk

Category: Cycling

RRP: 47

GTIN: 847746011583

Description: WHAT YOU NEED TO KNOW: Stan's Yellow Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure a double wrap of tape is required. WHAT IF I HAVE AN OLDER RIM? The BST Bead Socket Technology profile developed by Stan's No Tubes was a departure from traditional bicycle rim design and its core concept is the basis for the vast majority of 'tubeless-ready' rims and wheels on the market today. Stan's Yellow Rim Tape is not by itself a tubeless conversion for older traditional non-'tubeless-ready' rims. These older rims require the use of a Stan’s No Tubes Rim Strip now discontinued to re-shape the rim bed to achieve a safe secure tubeless setup. While we would recommend considering a new tubeless-ready wheelset in place of a rim strip conversion Stan's Rim Strips and kits may still be available at your local bike shop and can be used to convert vintage bikes with older non-tubeless-ready rims. Using only Yellow Rim Tape and Stan’s No Tubes sealant on a non-tubeless-ready rim can result in not only difficult inflation during set-up but catastrophic 'burping' issues while riding. Creates durable airtight seal over spoke holes. Completely non-porous vapour barrier seals rim interior from moisture. Natural gum rubber adhesive sticks where and when you want it to but leaves no residue. Low friction surface helps tyre beads slip into place. Stan's 21mm Rim Tape is recommended for rims with an internal width of 17-20mm. 9.14m x 21mm 10yd x.83in. Stan's 25mm Rim Tape is recommended for rims with an internal width of 23-25mm. 9.14m x 25mm 10yd x.98in. Stan's 27mm Rim Tape is recommended for rims with an internal width of 25-27mm. 9.14m x 27mm 10yd x 1.06in. Stan's 30mm Rim Tape is recommended for rims with an internal width of 28-30mm. 9.14m x 30mm 10yd x 1.18in. Stan's 33mm Rim Tape is recommended for rims with an internal width of 31-33mm. 9.14m x 33mm 10yd x 1.30in. Stan's 36mm Rim Tape is recommended for rims with an internal width of 34-36mm. 9.14m x 36mm 10yd x 1.41in. Stan's 39mm Rim Tape is recommended for rims with an internal width of 37-39mm. 9.14m x 39mm 10yd x 1.54in. Stans No Tubes Rim Tape 10yds (9.14m) 10yd x .98in 9.14m x 25mm - shop the best deal online on sportessentials.co.uk

Category: Cycling

RRP: 19

GTIN: 183720000281

Description: WHAT YOU NEED TO KNOW: Stan's Yellow Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure a double wrap of tape is required. WHAT IF I HAVE AN OLDER RIM? The BST Bead Socket Technology profile developed by Stan's No Tubes was a departure from traditional bicycle rim design and its core concept is the basis for the vast majority of 'tubeless-ready' rims and wheels on the market today. Stan's Yellow Rim Tape is not by itself a tubeless conversion for older traditional non-'tubeless-ready' rims. These older rims require the use of a Stan’s No Tubes Rim Strip now discontinued to re-shape the rim bed to achieve a safe secure tubeless setup. While we would recommend considering a new tubeless-ready wheelset in place of a rim strip conversion Stan's Rim Strips and kits may still be available at your local bike shop and can be used to convert vintage bikes with older non-tubeless-ready rims. Using only Yellow Rim Tape and Stan’s No Tubes sealant on a non-tubeless-ready rim can result in not only difficult inflation during set-up but catastrophic 'burping' issues while riding. Creates durable airtight seal over spoke holes. Completely non-porous vapour barrier seals rim interior from moisture. Natural gum rubber adhesive sticks where and when you want it to but leaves no residue. Low friction surface helps tyre beads slip into place. Stan's 21mm Rim Tape is recommended for rims with an internal width of 17-20mm. 9.14m x 21mm 10yd x.83in. Stan's 25mm Rim Tape is recommended for rims with an internal width of 23-25mm. 9.14m x 25mm 10yd x.98in. Stan's 27mm Rim Tape is recommended for rims with an internal width of 25-27mm. 9.14m x 27mm 10yd x 1.06in. Stan's 30mm Rim Tape is recommended for rims with an internal width of 28-30mm. 9.14m x 30mm 10yd x 1.18in. Stan's 33mm Rim Tape is recommended for rims with an internal width of 31-33mm. 9.14m x 33mm 10yd x 1.30in. Stan's 36mm Rim Tape is recommended for rims with an internal width of 34-36mm. 9.14m x 36mm 10yd x 1.41in. Stan's 39mm Rim Tape is recommended for rims with an internal width of 37-39mm. 9.14m x 39mm 10yd x 1.54in. Stans No Tubes Rim Tape 10yds (9.14m) 10yd x .83in 9.14m x 21mm - shop the best deal online on sportessentials.co.uk

Category: Cycling

RRP: 19

GTIN: 183720000205

Description: WHAT YOU NEED TO KNOW: Stan's Yellow Tape is designed to work with tubeless-ready rims and wheels. If you'll be inflating your tyres to 45psi or less one layer of yellow tape in the bed of your rim is all you need for most rims. For road tubeless and similar tyres that require more than 45psi of pressure a double wrap of tape is required. WHAT IF I HAVE AN OLDER RIM? The BST Bead Socket Technology profile developed by Stan's No Tubes was a departure from traditional bicycle rim design and its core concept is the basis for the vast majority of 'tubeless-ready' rims and wheels on the market today. Stan's Yellow Rim Tape is not by itself a tubeless conversion for older traditional non-'tubeless-ready' rims. These older rims require the use of a Stan’s No Tubes Rim Strip now discontinued to re-shape the rim bed to achieve a safe secure tubeless setup. While we would recommend considering a new tubeless-ready wheelset in place of a rim strip conversion Stan's Rim Strips and kits may still be available at your local bike shop and can be used to convert vintage bikes with older non-tubeless-ready rims. Using only Yellow Rim Tape and Stan’s No Tubes sealant on a non-tubeless-ready rim can result in not only difficult inflation during set-up but catastrophic 'burping' issues while riding. Creates durable airtight seal over spoke holes. Completely non-porous vapour barrier seals rim interior from moisture. Natural gum rubber adhesive sticks where and when you want it to but leaves no residue. Low friction surface helps tyre beads slip into place. Stan's 21mm Rim Tape is recommended for rims with an internal width of 17-20mm. 54.86m x 21mm 60yd x 0.83in. Stan's 25mm Rim Tape is recommended for rims with an internal width of 23-25mm. 54.86m x 25mm 60yd x 0.98in. Stan's 27mm Rim Tape is recommended for rims with an internal width of 25-27mm. 54.86m x 27mm 60yd x 1.06in. Stan's 30mm Rim Tape is recommended for rims with an internal width of 28-30mm. 54.86m x 30mm 60yd x 1.18in. Stan's 33mm Rim Tape is recommended for rims with an internal width of 31-33mm. 54.86m x 33mm 60yd x 1.30in. Stan's 36mm Rim Tape is recommended for rims with an internal width of 34-36mm. 54.86m x 36mm 60yd x 1.41in. Stan's 39mm Rim Tape is recommended for rims with an internal width of 37-39mm. 54.86m x 39mm 60yd x 1.54in. Stans No Tubes Rim Tape 60yds (54.86m) 60yd x .98in 54.86m x 25mm - shop the best deal online on sportessentials.co.uk

Category: Cycling

RRP: 47

GTIN: 183720000298