Shimano MTB Gear Cable Set
2400 ratings
TO EXPLORE MORE
Price: £14.99
Brand: Shimano
Description: The Shimano MTB Gear Cable Set gives you everything you need to replace old gear cables in one handy pack. Complete MTB gear cable set with all you need in one handy pack Fitting new gears or completely overhauling your gear cabling couldn't be easier - everything you need in one pack Includes 1.2 mm inner wires (1 x 2100 mm, 1 x 1800 mm) and black 4 mm SP41 outer casing for a complete bike (1 x 3000 mm), and sealed outer caps one with added tongue for rubber shield plus inner end caps Stainless steel precision ground round inner wire leaves a smooth surface for low friction while providing high corrosion resistance Outer casing is lubricated internally along its length with low-friction silicone grease to reduce cable friction Special construction process makes for an axially stiff outer casing that transmits shifting movements accurately and quickly Outer casing is lined with a polymer sheath to assist with the smooth operation of the inner wire The outer casing is lubricated internally along its length with low-friction silicone grease to reduce cable friction and give you super smooth shifting. The stainless-steel precision ground round inner wire leaves a smooth surface for low friction while providing high corrosion resistance which means it will last longer. The special construction process makes for an axially stiff outer casing that transmits shifting movements accurately and quickly.
Category: Cycling
Merchant: Tweeks Cycles
Product ID: MADCABGR7BK
Delivery time: 1 to 4 days
Delivery cost: 2.5
GTIN: 4524667602880
My website utilises affiliate links when you click my 'Get the best deal now' buttons. If you buy something through one of these links, I may earn a little commission, at no extra cost to you.
I have relationships with many of the top online retailers (purchasing, shipping and returns will be handled directly by them) which enables me to offer the best deal online for the Shimano MTB Gear Cable Set and many other similar products - which will appear below, to enhance your online shopping experience.
For even more great deals on Shimano Cycling, click the link.
Author: User Fred
Rating: 5
Review: Purchased to replace crusty front and rear derailleur operating cables as part of work to freshen up an old 90's 21 gear mountain bike - this did the job for me. Two cable inners plus two cable ends. Looks like it has enough cable outer (210cm) and associated ferroules (8 cable casing ends ) to do pretty much any standard bike. The cable casing (4mm - looked a bit smaller than the original but but fitted fine) is prelubed on the inside with low friction coatings, so not supposed require additional greasing. The cable inner is stainless steel so the exposed lengths shouldn't rust (unlike my admittedly very old originals). Cable inners are about 180cm and 210cm. make sure your wire cutters are decent quality and up to the job, you'll also need a cable crimper (often come as part of a wire cutter) spanners/hex/torx of the right sizes for your bike fittings. There are no instructions, but this job should be easy enough to do, there are plenty of good videos online for guidance, but essentially, you'll need to remove the existing casings and use as a template for cutting the replacement lengths from the new casing. Less than 20 mins work if you know what you're doing, have a good work area and the right tools. For crusty fittings, it's worth a few sprays of WD40 or similar the night before to avoid painful removal struggles.
Author: Amazon Customer
Rating: 5
Review: Treat your bike to a cable change every now and then and keep the gear changes nice and smooth. Good quality inners and outers like these make a big difference.
