Hope Sports And Gym - page 5

Description: The Hope R22 Spiderless Chainring SR3 offers a new tooth profile compatible with all major drivetrain types along with updated spider designs. Hope R22 Spiderless Chainring SR3 Features Available in 28, 30, 32, 34 & 36T3 Bolt Direct Mount 3mm Offset (52mm or 55mm chainline depending on crank specification)A new range of MTB chainrings from Hope which offers a new tooth profile compatible with all major drivetrain types along with updated spider designs. Compatible with 9/10/11 and 12 Spd drivetrains including Sram T-Type and Shimano HG+ Asymmetric tooth profile engineered for cross-compatibility and functionality with different drivetrain systems Improved mud-shedding capability Improved chain retention Better performance with extreme chain angles on modern 1 x drivetrains Tooth profile allows for more chain wear before function is compromised, extending service life Spiderless rings have a new leg design with improved strength and stiffness Machined from 7075-T6 aluminium. Hope R22 Spiderless Chainring SR3 Orange - shop the best deal online on sportessentials.co.uk

Category: Sports and gym

Description: Building on Hope’s 30+ years of manufacturing hubs, the Hope Pro 5 Front Centre Lock 24H Boost is the combination of all their experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real-world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6-pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings. And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future-proofing your wheels. Hope Pro 5 Front Centre Lock 24H Boost Features 24 Hole Centre Lock Straight Pull hub New hub body profile for increased stiffness without adding weight Fully serviceable and rebuildable with simple tools Available with all modern freehub bodies End spacers can be easily swapped to suit different frame and axle standards Sealed Stainless Steel cartridge bearings throughout Hub shell machined from forged 2014 T6 aluminium billet. Hope Pro 5 Front Centre Lock 24H Boost Silver - shop the best deal online on sportessentials.co.uk

Category: Sports and gym

Description: Building on Hope’s 30+ years of manufacturing hubs, the Hope Pro 5 Front Centre Lock 24H Boost is the combination of all their experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real-world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6-pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings. And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future-proofing your wheels. Hope Pro 5 Front Centre Lock 24H Boost Features 24 Hole Centre Lock Straight Pull hub New hub body profile for increased stiffness without adding weight Fully serviceable and rebuildable with simple tools Available with all modern freehub bodies End spacers can be easily swapped to suit different frame and axle standards Sealed Stainless Steel cartridge bearings throughout Hub shell machined from forged 2014 T6 aluminium billet. Hope Pro 5 Front Centre Lock 24H Boost Red - shop the best deal online on sportessentials.co.uk

Category: Sports and gym

Description: Building on Hope’s 30+ years of manufacturing hubs, the Hope Pro 5 Front Centre Lock 24H Boost is the combination of all their experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real-world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6-pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings. And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future-proofing your wheels. Hope Pro 5 Front Centre Lock 24H Boost Features 24 Hole Centre Lock Straight Pull hub New hub body profile for increased stiffness without adding weight Fully serviceable and rebuildable with simple tools Available with all modern freehub bodies End spacers can be easily swapped to suit different frame and axle standards Sealed Stainless Steel cartridge bearings throughout Hub shell machined from forged 2014 T6 aluminium billet. Hope Pro 5 Front Centre Lock 24H Boost Purple - shop the best deal online on sportessentials.co.uk

Category: Sports and gym

Description: Building on Hope’s 30+ years of manufacturing hubs, the Hope Pro 5 Front Centre Lock 24H Boost is the combination of all their experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real-world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6-pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings. And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future-proofing your wheels. Hope Pro 5 Front Centre Lock 24H Boost Features 24 Hole Centre Lock Straight Pull hub New hub body profile for increased stiffness without adding weight Fully serviceable and rebuildable with simple tools Available with all modern freehub bodies End spacers can be easily swapped to suit different frame and axle standards Sealed Stainless Steel cartridge bearings throughout Hub shell machined from forged 2014 T6 aluminium billet. Hope Pro 5 Front Centre Lock 24H Boost Orange - shop the best deal online on sportessentials.co.uk

Category: Sports and gym

Description: Building on Hope’s 30+ years of manufacturing hubs, the Hope Pro 5 Front Centre Lock 24H Boost is the combination of all their experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real-world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6-pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings. And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future-proofing your wheels. Hope Pro 5 Front Centre Lock 24H Boost Features 24 Hole Centre Lock Straight Pull hub New hub body profile for increased stiffness without adding weight Fully serviceable and rebuildable with simple tools Available with all modern freehub bodies End spacers can be easily swapped to suit different frame and axle standards Sealed Stainless Steel cartridge bearings throughout Hub shell machined from forged 2014 T6 aluminium billet. Hope Pro 5 Front Centre Lock 24H Boost Blue - shop the best deal online on sportessentials.co.uk

Category: Sports and gym

Description: Building on Hope’s 30+ years of manufacturing hubs, the Hope Pro 5 Front Centre Lock 24H Boost is the combination of all their experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real-world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6-pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings. And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future-proofing your wheels. Hope Pro 5 Front Centre Lock 24H Boost Features 24 Hole Centre Lock Straight Pull hub New hub body profile for increased stiffness without adding weight Fully serviceable and rebuildable with simple tools Available with all modern freehub bodies End spacers can be easily swapped to suit different frame and axle standards Sealed Stainless Steel cartridge bearings throughout Hub shell machined from forged 2014 T6 aluminium billet. Hope Pro 5 Front Centre Lock Straight Pull 24H Boost Black - shop the best deal online on sportessentials.co.uk

Category: Sports and gym

Description: Please note: Generic image used, please check all specifications before purchase Building on Hope’s 30+ years of manufacturing hubs, the Hope Pro 5 Front Centre Lock Straight Pull 24H Hub is the combination of all their experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real-world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6-pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings. And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future-proofing your wheels. Hope Pro 5 Front Centre Lock Straight Pull 24H Hub Features 24 Hole Centre Lock Straight Pull Hub New hub body profile for increased stiffness without adding weight Fully serviceable and rebuildable with simple tools Available with all modern freehub bodies End spacers can be easily swapped to suit different frame and axle standards Sealed Stainless Steel cartridge bearings throughout Hub shell machined from forged 2014 T6 aluminium billet. Hope Pro 5 Front Centre Lock Straight Pull 24H Hub Silver - shop the best deal online on sportessentials.co.uk

Category: Sports and gym

Description: Please note: Generic image used, please check all specifications before purchase Building on Hope’s 30+ years of manufacturing hubs, the Hope Pro 5 Front Centre Lock Straight Pull 24H Hub is the combination of all their experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real-world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6-pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings. And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future-proofing your wheels. Hope Pro 5 Front Centre Lock Straight Pull 24H Hub Features 24 Hole Centre Lock Straight Pull Hub New hub body profile for increased stiffness without adding weight Fully serviceable and rebuildable with simple tools Available with all modern freehub bodies End spacers can be easily swapped to suit different frame and axle standards Sealed Stainless Steel cartridge bearings throughout Hub shell machined from forged 2014 T6 aluminium billet. Hope Pro 5 Front Centre Lock Straight Pull 24H Hub Red - shop the best deal online on sportessentials.co.uk

Category: Sports and gym

Description: Please note: Generic image used, please check all specifications before purchase Building on Hope’s 30+ years of manufacturing hubs, the Hope Pro 5 Front Centre Lock Straight Pull 24H Hub is the combination of all their experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real-world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6-pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings. And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future-proofing your wheels. Hope Pro 5 Front Centre Lock Straight Pull 24H Hub Features 24 Hole Centre Lock Straight Pull Hub New hub body profile for increased stiffness without adding weight Fully serviceable and rebuildable with simple tools Available with all modern freehub bodies End spacers can be easily swapped to suit different frame and axle standards Sealed Stainless Steel cartridge bearings throughout Hub shell machined from forged 2014 T6 aluminium billet. Hope Pro 5 Front Centre Lock Straight Pull 24H Hub Purple - shop the best deal online on sportessentials.co.uk

Category: Sports and gym

Description: Please note: Generic image used, please check all specifications before purchase Building on Hope’s 30+ years of manufacturing hubs, the Hope Pro 5 Front Centre Lock Straight Pull 24H Hub is the combination of all their experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real-world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6-pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings. And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future-proofing your wheels. Hope Pro 5 Front Centre Lock Straight Pull 24H Hub Features 24 Hole Centre Lock Straight Pull Hub New hub body profile for increased stiffness without adding weight Fully serviceable and rebuildable with simple tools Available with all modern freehub bodies End spacers can be easily swapped to suit different frame and axle standards Sealed Stainless Steel cartridge bearings throughout Hub shell machined from forged 2014 T6 aluminium billet. Hope Pro 5 Front Centre Lock Straight Pull 24H Hub Orange - shop the best deal online on sportessentials.co.uk

Category: Sports and gym

Description: Please note: Generic image used, please check all specifications before purchase Building on Hope’s 30+ years of manufacturing hubs, the Hope Pro 5 Front Centre Lock Straight Pull 24H Hub is the combination of all their experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real-world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6-pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings. And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future-proofing your wheels. Hope Pro 5 Front Centre Lock Straight Pull 24H Hub Features 24 Hole Centre Lock Straight Pull Hub New hub body profile for increased stiffness without adding weight Fully serviceable and rebuildable with simple tools Available with all modern freehub bodies End spacers can be easily swapped to suit different frame and axle standards Sealed Stainless Steel cartridge bearings throughout Hub shell machined from forged 2014 T6 aluminium billet. Hope Pro 5 Front Centre Lock Straight Pull 24H Hub Blue - shop the best deal online on sportessentials.co.uk

Category: Sports and gym

Description: Please note: Generic image used, please check all specifications before purchase Building on Hope’s 30+ years of manufacturing hubs, the Hope Pro 5 Front Centre Lock Straight Pull 24H Hub is the combination of all their experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real-world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6-pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings. And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future-proofing your wheels. Hope Pro 5 Front Centre Lock Straight Pull 24H Hub Features 24 Hole Centre Lock Straight Pull Hub New hub body profile for increased stiffness without adding weight Fully serviceable and rebuildable with simple tools Available with all modern freehub bodies End spacers can be easily swapped to suit different frame and axle standards Sealed Stainless Steel cartridge bearings throughout Hub shell machined from forged 2014 T6 aluminium billet. Hope Pro 5 Front Centre Lock Straight Pull 24H Hub Black - shop the best deal online on sportessentials.co.uk

Category: Sports and gym

Description: Building on Hope’s 30+ years of manufacturing hubs, the Hope Pro 5 Front Centre Lock 32H Hub Boost is the combination of all their experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real-world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6-pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings. And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future-proofing your wheels. Hope Pro 5 Front Centre Lock 32H Hub Boost Features 32 Hole Centre Lock New hub body profile for increased stiffness without adding weight Fully serviceable and rebuildable with simple tools Available with all modern freehub bodies End spacers can be easily swapped to suit different frame and axle standards Sealed Stainless Steel cartridge bearings throughout Hub shell machined from forged 2014 T6 aluminium billet. Hope Pro 5 Front Centre Lock 32H Hub Boost Silver - shop the best deal online on sportessentials.co.uk

Category: Sports and gym

Description: Building on Hope’s 30+ years of manufacturing hubs, the Hope Pro 5 Front Centre Lock 32H Hub Boost is the combination of all their experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real-world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6-pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings. And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future-proofing your wheels. Hope Pro 5 Front Centre Lock 32H Hub Boost Features 32 Hole Centre Lock New hub body profile for increased stiffness without adding weight Fully serviceable and rebuildable with simple tools Available with all modern freehub bodies End spacers can be easily swapped to suit different frame and axle standards Sealed Stainless Steel cartridge bearings throughout Hub shell machined from forged 2014 T6 aluminium billet. Hope Pro 5 Front Centre Lock 32H Hub Boost Red - shop the best deal online on sportessentials.co.uk

Category: Sports and gym

Description: Building on Hope’s 30+ years of manufacturing hubs, the Hope Pro 5 Front Centre Lock 32H Hub Boost is the combination of all their experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real-world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6-pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings. And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future-proofing your wheels. Hope Pro 5 Front Centre Lock 32H Hub Boost Features 32 Hole Centre Lock New hub body profile for increased stiffness without adding weight Fully serviceable and rebuildable with simple tools Available with all modern freehub bodies End spacers can be easily swapped to suit different frame and axle standards Sealed Stainless Steel cartridge bearings throughout Hub shell machined from forged 2014 T6 aluminium billet. Hope Pro 5 Front Centre Lock 32H Hub Boost Purple - shop the best deal online on sportessentials.co.uk

Category: Sports and gym

Description: Building on Hope’s 30+ years of manufacturing hubs, the Hope Pro 5 Front Centre Lock 32H Hub Boost is the combination of all their experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real-world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6-pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings. And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future-proofing your wheels. Hope Pro 5 Front Centre Lock 32H Hub Boost Features 32 Hole Centre Lock New hub body profile for increased stiffness without adding weight Fully serviceable and rebuildable with simple tools Available with all modern freehub bodies End spacers can be easily swapped to suit different frame and axle standards Sealed Stainless Steel cartridge bearings throughout Hub shell machined from forged 2014 T6 aluminium billet. Hope Pro 5 Front Centre Lock 32H Hub Boost Black - shop the best deal online on sportessentials.co.uk

Category: Sports and gym

Description: Building on Hope’s 30+ years of manufacturing hubs, the Hope Pro 5 Front Centre Lock 28H Hub Boost is the combination of all their experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real-world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6-pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings. And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future-proofing your wheels. Hope Pro 5 Front Centre Lock 28H Hub Boost Features 28 Hole Centre Lock New hub body profile for increased stiffness without adding weight Fully serviceable and rebuildable with simple tools Available with all modern freehub bodies End spacers can be easily swapped to suit different frame and axle standards Sealed Stainless Steel cartridge bearings throughout Hub shell machined from forged 2014 T6 aluminium billet. Hope Pro 5 Front Centre Lock 28H Hub Boost Silver - shop the best deal online on sportessentials.co.uk

Category: Sports and gym

Description: Building on Hope’s 30+ years of manufacturing hubs, the Hope Pro 5 Front Centre Lock 28H Hub Boost is the combination of all their experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real-world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6-pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings. And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future-proofing your wheels. Hope Pro 5 Front Centre Lock 28H Hub Boost Features 28 Hole Centre Lock New hub body profile for increased stiffness without adding weight Fully serviceable and rebuildable with simple tools Available with all modern freehub bodies End spacers can be easily swapped to suit different frame and axle standards Sealed Stainless Steel cartridge bearings throughout Hub shell machined from forged 2014 T6 aluminium billet. Hope Pro 5 Front Centre Lock 28H Hub Boost Purple - shop the best deal online on sportessentials.co.uk

Category: Sports and gym

Description: Building on Hope’s 30+ years of manufacturing hubs, the Hope Pro 5 Front Centre Lock 28H Hub Boost is the combination of all their experience to meet and exceed the demands of current and future bike technology. The Pro 4 proved to be one of the most reliable and versatile hubs on the market. The Pro 5 builds on this with improvements throughout, offering the right balance between speed of pick-up, load capacity, durability and drag. One of the key design objectives for the Pro 5 was the reduction of drag in the drive mechanism. This has real-world riding benefits and was achieved by upgrading the sealing with a new zero drag labyrinth seal, and an improved ratchet and pawl system, with new springs. Both greatly reduce drag as well as increase durability and load capacity when compared with the Pro 4. Another big update comes in an increase in the points of engagement (from 44 to 108) using an offset 6-pawl freehub design, where 3 pawls are engaged at any time. This achieves the right balance between speed of pick-up, load capacity, drag & durability, and in real-world terms gives a speedy feel on the trail whilst keeping crank movement to an acceptable level without compromising the free running of the hub or its reliability. Externally the shell takes a new profile to add stiffness without adding weight whilst housing a new axle design enabling the use of bigger bearings in a better arrangement to fit the latest freehub standards whilst increasing load capacity. As with every product made at Hope durability and longevity are key. Everything about the Pro 5 has been considered, and tested to work in the worst conditions possible from seals to bearings. And eventually if something does wear out the Pro 5 is fully serviceable and rebuildable with simple tools, or if you need to change drivetrain standards one hub works with everything. So swapping freehubs is easily done, and changing end caps to suit different frame and fork axle standards future-proofing your wheels. Hope Pro 5 Front Centre Lock 28H Hub Boost Features 28 Hole Centre Lock New hub body profile for increased stiffness without adding weight Fully serviceable and rebuildable with simple tools Available with all modern freehub bodies End spacers can be easily swapped to suit different frame and axle standards Sealed Stainless Steel cartridge bearings throughout Hub shell machined from forged 2014 T6 aluminium billet. Hope Pro 5 Front Centre Lock 28H Hub Boost Orange - shop the best deal online on sportessentials.co.uk

Category: Sports and gym